Double-Sided Heated Motorcycle Glove "DH Touring"
Double-sided heated motorcycle gloves "Dual Heat Touring
The comfortable winter heating gloves "DH Touring" for motorcyclists provide warm fingers and hands on the inside and outside in very cold weather. The gloves provide a convincing volume of heat around the entire hand, there is no cold spot due to the cooling driving wind or even cold hand grips. The glove has a close-fitting gauntlet that is worn under the jacket sleeve and is preferably supplied with smooth power cables under the clothing. A special bonus: The heated gloves can be powered portably with 12V/24V vehicle power but also with a Heizteufel LiPo battery pack. Battery operation is recommended for short distance trips to conserve the vehicle battery while enjoying the "freedom of cordless operation". The battery pocket is integrated on the inside, which additionally protects the battery against cold and moisture - a perfect design for cold days. Of course, heated driving also has an effect on road safety, since braking and clutching are simply easier and safer with warm fingers. The lightweight and ergonomically shaped touring glove uses proven materials from well-known manufacturers such as PorelleTM climate membrane, 3MTM Thinsulate, SchoellerTM protectors and reflectors, as well as innovative and durable heating technology from HeizteufelTM. With the new "Dual Heat Touring" model, the heating performance is optimized to provide even heating without cold bridges or hot spots. The result is a heating glove optimized in all respects with an excellent wearing comfort and high operational safety.
Notes on trying on, the wearing comfort and care
The "DH Touring" motorcycle heating glove is a robust full leather glove and is designed for great heating performance at extreme cold temperatures. This means that the full leather appears stiff during the fitting and the finger mobility is also still limited. Only after wearing the glove several times does the leather become soft and supple, and bending creases then form on the hand and fingers, reflecting the personal handprint - similar to what you know from leather pants that you have to wear in. For this, if the glove is then registered after a few wearings, it becomes a long-term companion of a year-round motorcyclist, 10, 15 years and longer periods of use are not unusual for the "DH Touring". Those who can do without the typical motorcycle protective materials, protectors and biking in extreme cold temperatures, preferring instead a soft leather with tactile finger feel, will be very happy with the model "Love & Peace".
The cowhide leather can be wiped with a damp cloth and impregnated with a leather spray before and after the season. The lining is rinsed with soapy water and set up to dry near a radiator, avoiding contact with hot heating parts.
Usage examples ...
- ... for short distances in winter we recommend the following battery heating packages to preserve the motorcycle battery and for the feeling of warmth even before you get on your motorcycle:
- For hands sensitive to cold and in cold winds in frosty areas, the Pro-Push-2 battery heating pack provides very warm heating.
- The battery Medi heating pack provides basic heating in transitional seasons. Note, the highest heat output of the Medi battery pack is equal to the lowest heat level of the Pro-Push battery pack, which provides twice the heat output in its highest heat level. The individual battery solution enables the warming of hands even away from motorcycling.
- ... for long distances exceeding 2 hours, an on-board power supply with the motorcycle battery, the switched light circuit or the use of an on-board power socket, also known as a cigarette lighter, is recommended. To match the heating temperature to the ambient cold and prevent overheating of the gloves when directly connected to the on-board power supply, a heating control is used between the power source and the gloves. The following heating controls are offered:
- Potentiometer handlebar heating control with Velcro fastening and 2 spiral cables to the gloves
- Potentiometer built-in heater control, consisting of a rotary potentiometer unit with 120cm control cable, for which a 6mm hole is drilled in a fairing panel for the potentiometer pin, and an 8mm flat, waterproof control under the seat, from which a short connecting cable with battery pole rings and 2 connecting cables for the gloves come off. Smooth cables can be routed under clothing, discreet and not exposed to the wind. And as a widely known alternative spiralized cables. For the connecting cables Heizteufel also offers waterproof panel jacks to prevent shearing / crushing of the cables.
- A cable inline pot control and a 3-stage handlebar push control are the rare exceptions, but are available upon request.
10 reasons for valuable as well as sustainable Heizteufel products:
- Heizteufel's product philosophy stands for detail-oriented work, ecological sustainability, innovative solutions and lasting durability of all products
- The selection of the best materials and tested electronic parts by Heizteufel is guaranteed for a demanding customer market
- Custom-made 0.7mm-thick heating wires consist of 550 braided individual wires and a robust Teflon sheathing, the bending frequency > 1.2 million.
- Cold-resistant cable conductors ensure high flexibility and bendability even at -40°C, cable connectors are waterproof to IP69k
- Extremely good battery qualities for a safe and long service life, in-house laboratory tests are carried out with German testing equipment
- Great customer proximity through constant accessibility and consideration of customer opinions for future product developments
- Development, design and production of heated clothing and heated gloves by qualified and socially insured specialists
- Quality control according to US standard MIL-STD-105E, individual testing of gloves, controls and battery packs
- Compliance with all legal regulations regarding battery ordinance, old equipment law, packaging ordinance, DSGVO, etc.
- Telephone advice, service, repairs and technical adjustments - short distances for your high satisfaction
Photo notes The thermal image photos show the heating of the inside and outside of the hand of the "DH Touring" glove model with Medi rechargeable battery packs in the top row, the bottom row is heated with Pro rechargeable battery packs.
| Glove size chart | ||||||||
| German (DIN) | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| US | XXS | XS | S | M | L | XL | XXL | XXXL |
| Hand circumference (cm) | 12,5 | 15 | 17,5 | 20 | 22,5 | 25 | 27,5 | 30 |
| Hand length (cm) | 16 | 17 | 18,5 | 20 | 21 | 22 | 23 | 24 |
How to determine your glove size
- Hand circumference (A): Place the tape measure around the knuckles and palm, without the thumb.
- Hand length (B): Place the tape measure from the wrist to the tip of the middle finger.
| Heating values and heating duration | ||||||||
| Power supply | Power | Watt | 100% | Time | 75% | Time | 50% | Time |
| 7.4V MEDI (100%) and MEDI-PUSH (100%-75%-50% of the heating power) | 1,9 A | 15 W | 55°C | 2:30 | 45°C | 3:45 | 35°C | 5:00 |
| 11.1V PRO (100%) and PRO-Push (100%-75%-50% of the heating power) | 2,8 A | 30 W | 75°C | 2:20 | 65°C | 3:30 | 55°C | 4:40 |
| 12.0V battery voltage | 3,0 A | 36 W | ||||||
| 13.8V automotive voltage | 3,5 A | 48 W | ||||||
| Heating duration and heating temperature of a pair of gloves, each equipped with 2 power supplies and depending on the set heating level and ambient temperature. Specifications without guarantee, subject to technical changes. |
||||||||
Hand outer material:
Connection cable with waterproof RCA connector, IP69k
Individual battery and vehicle specific applications can be found on our accessories pages
- Hydrophobic water repellent finely tanned 100% cowhide aniline leather.
- SchoellerTM Kevlar protectors as knuckle protection
- SchoellerTM reflector trim
- suede trimmed fingers serve as visor wipers and provide excellent slip resistance to the palm
- Velcro wrist strap
- 100% polyester with drawstring snap closure for optimal fit and windproofness
- Premium grade waterproof, windproof as well as breathable PorelleTM climate membrane.
- Cold-insulating 3MTM Thinsulate (65% polypropylene + 35% polyester).
- 80% polyester + 20% cotton for a soft feel
- Integrated waterproof cuff pocket for battery storage and connection cables
- Very thin and durable highly flexible HeizteufelTM heating wires with tear-resistant sheathing and defined distances to avoid cold bridges and burns (hot spots)
- 15W @ 7.4V battery operation
- 30W @ 11,1V battery operation
- 48W @ 13.8V vehicle operation (adjustable heating control is recommended)
Connection cable with waterproof RCA connector, IP69k
Individual battery and vehicle specific applications can be found on our accessories pages
One pair of heated gloves in sizes S/07, M/08, L/09, XL/10, XXL/11, XXXL/12.
- Battery operation at cold temperatures down to -10°C : Battery heating packs 3-9011-MEDI, 3-9011-MEDI-PUSH-2
- Battery operation at cold temperatures down to -30°C : Battery heating packs 3-9011-PRO-PUSH-2
- 12V vehicle operation : 3-9044-40W, 3-9044-80W/BQ, 3-9046-80W
