Heated Socks, Full Sole and Toe Warming for Divers
Heated Socks, Full Sole and Toe Warming for Divers
Heizteufels heatable 2-zone socks for divers heat the entire sole of the foot and around the toes from the heel over the toes to the instep with 42 ° C feel-good temperature and very low power consumption. The high heating power is appropriate for diving conditions and is perceived as very pleasantly warm. Compared to the heatable standard socks from Heizteufel, the diving socks have twice the heating power.
The heatable 2-zone socks are made of an elastic blended fabric and double-layered, which creates additional insulation against the cold from below.
The warming socks come with a waterproof connector, which is essential when diving. A connected battery pack provides an instantly noticeable warmth in the diver's fins after just a few moments.
The heatable 2-zone socks are made of an elastic blended fabric and double-layered, which creates additional insulation against the cold from below.
The warming socks come with a waterproof connector, which is essential when diving. A connected battery pack provides an instantly noticeable warmth in the diver's fins after just a few moments.
Battery Packs and Heating Packs - 12V and 15V
The diving socks get the necessary power supply with very powerful LiPo battery packs. For people with a normal feeling of cold, the waterproof battery heating packs "11.1V | 3,100mAh LiPo battery heating pack Pro-Dive-Touch-1k with magn. heating control for diving heating clothing" and "11.1V | 6,200mAh LiPo battery heating pack Pro-Dive-Touch-2k with magn. heating control for diving heating clothing" are just right. If you are particularly sensitive to cold or are going to a very cold region or longer dives are intended, then the heating package "14.8V | 10,000mAh LiPo Akku-Heizpaket XPro-Dive-Touch-2k mit magn. Heizsteuerung für Taucherheizbekleidung" offers itself due to the strong heating power. Sometimes it is advisable to carry the battery packs in your pants pocket, a battery bag with clip holder (for each individual battery) or a belt bag - order the matching connection cables 60cm, 90cm or 120cm best right away.
.jpg)
Maintenance, Cleaning
- washable up to 40°C (hand wash is recommended)
- hang damp after washing
- Do not dry clean!
- Do not wring out!
- Do not spin!
- Not suitable for the dryer!
- Do not iron!
The socks are machine washable, if possible put them in a laundry bag and wash with wool or delicate cycle. Of course, hand washing is also possible. Please do not use fabric softener and tumble dryer!
Heizteufel offers various mounting and carrying options for each battery pack:
- Spring steel clip holder for boots or boots can also be plugged into the belt and waistband by means of a connecting cable.
- Velcro strap holder (for individual batteries) for discreet, secure and snug attachment to the lower leg, preferably above the calf
- Textile battery clip pouches for belt and waistband as well as for boots or boots
Heating Values and Heating Duration
| Power Supply for a Single Item (1 Sock) | Ampere | Watt | 100% | Time | 75% | Time | 50% | Time |
| Current load / power @12V DC | 1,4A | 17W |
45°C 40°C |
2:30 |
42°C 37°C |
3:45 |
37°C 33°C |
5:00 |
Note on the table: The heating temperatures and heating duration are specified individually for each item with a voltage source and depending on the set heating level. The heating power in watts is multiplied by 2 for heating pairs and results in the value for the total heating power. All data are without guarantee. Technical changes and errors excepted.
— IMPORTANT NOTE: Items with custom design are excluded from the right of return or exchange. (see right of withdrawal / reasons for exclusion and expiry). —
- Material: 80% cotton, 15% polyester, 5% elastane (Lycra), skin-friendly and pleasantly soft
- Hand-linked toe
- Durable yarns
- Comfort waistband
- Reinforcement at heel and toe
- Very thin and durable highly flexible heating wires with tear-resistant sheathing and defined distances
- Operating voltage: 4V - 16V DC
- Current: max. 2A
- The manufacturer declares conformity according to CE 93/68
- OEKO-TEX Standard 100
- Socks without elastic waistband and without seam
- Heating surface: over the entire sole of the foot and toes
- Thickness of the socks: about 2 mm
- Heating power of one pair of heated socks:
- 30W @ 11,1V battery operation (adjustable heating control is recommended)
- Connecting cable with 25cm length and waterproof connector
- Free from carcinogenic and allergic substances (AZO, PCP)
- One pair of heatable socks for divers
- Sizes: 35-38, 39-42, 43-46, 47-50
- Instruction manual
- No batteries included. Please choose a heating package.
Battery operation:
- 11.1V | 3,100mAh LiPo battery heating pack "Pro-Dive-Touch-1k" with magn. heating control for diving heating clothing (3-9011-P/D1-T)
- 11.1V | 6.200mAh LiPo battery heating pack "Pro-Dive-Touch-2k" with magn. heating control for diving heating clothing (3-9011-P/D2-T)
- 14.8V | 5.000mAh LiPo battery heating pack "XPro-Dive-Touch-1k" with magn. heating control for diving heating clothes (3-9011-P/D14-T)
- 14,8V | 10.000mAh LiPo battery heating pack "XPro-Dive-Touch-2k" with magn. heating control for diving heating clothing (3-9011-P/D24-T)
Power consumption determination for combined immersion heaters to determine the necessary battery capacities of battery packs and battery tanks
| Heating Products | 11,1V - Battery | 14,8V - Battery | Enter A-Value |
| 4-zone shirt | 1,8A | 2,4A | A |
| 7-zone shirt | 3,0A | 4,0A | A |
| 4-zone pants | 1,8A | 2,4A | A |
| Overall for divers | 5,4A | 7,2A | A |
| Overall for divers + claves | 6,6A | 8,8A | A |
| heating vest for divers | 5,8A | 7,7A | A |
| + gloves | 2,5A | 3,3A | A |
| + socks for divers | 2,4A | 3,2A | A |
| Total current of all added heating consumers | = A | ||
| A-value x number of hours (duration of the planned dive) | = Ah | ||
A = Ampere, the current value for the consumption of single or multiple heating products.
Ah = ampere-hour, the minimum capacity required of the diving battery at 100% heating power.
Example calculation for a 14.8V battery supply:
Shirt + socks = 7.3A x 2.5h (heating time in hours) = 18.25Ah.
The battery capacity should be at least 18.25Ah.
Accordingly, the next largest battery technology would be a battery with 14.8V/20Ah.
DOWNLOAD: Power consumption calculation for combined immersion heaters (PDF)
