Both sides heated baselayer glove for divers "Dual Heat inDive thermal with Magnet" for 15V batteries
Watch video →
A new generation of heated diving gloves comes from Heizteufel called Dual Heat with flat magnetic contact for the electrical connection of the gloves with a power source, e.g. in the Trockie worn Heizteufel battery pack or external battery tanks. The advantages of this electrically conductive magnetic contact are the flat and small design, the easy handling of connecting and disconnecting the electrical connection with only one hand even when the glove is worn, and the flat cable feed, which can be worn excellently even under very tight-fitting arm cuffs without exerting excessive pressure on the forearm. A possible disadvantage, that should also be mentioned here, is an influence on diving fittings or compass, if these are used in the immediate vicinity (up to ~10cm).
Other advantages of our heated gloves for technical and recreational diving are the materials used successfully for years and an extremely well warming functional design. Particularly noteworthy is the palm and outer hand heating, the heated finger inside as well as finger outside. This Dual Heat heating system technically doubles the heating value of our heated gloves, but it is much more than that. Dual Heat stands for a particularly high-quality heat comfort and an excellent wearing feeling: touching cold objects no longer gives you unpleasant feelings of cold and maybe even pain.
A particularly low-friction outer material is used for the Dual Heat underwear heating glove in order to be able to slip into as many neoprene diving gloves as possible well and easily. The glove provides a good grip and high tactile feel due to its ergonomic shape and thin, elastic material. Thus, overgloves can also be slipped over, which otherwise cause a poor grip feeling or too cramped wearing due to too much inner hand material. The use of water-repellent materials of the inner lining support the good wearing comfort, they improve the thermal efficiency and keep your hands comfortably warm.
Another and helpful change the Dual Heat underwear experiences in its short cuff, so that an arm cuff does not interfere.
Heating packs and diver controls worn under drysuit
The diving heating gloves can be worn with a Heizteufel LiPo battery pack in the chest or trouser pocket under the dry suit. From the control unit, a parallel Y-cable and 2 connecting cables, either 90cm, 120cm or 180cm, are used to connect to the heating gloves. The cables can be ordered under Accessories > Cables with Connectors. Furthermore, but also a possibly existing, external 12 volt battery tank can be connected. Here a cable adapter is needed to connect battery tanks and diving suit feedthroughs from Santi, BTS or Yellow. We are happy to carry out conversion work on cable systems.
With an optional underwater heating control the heating power is switched on and off, additionally 3 heating levels offer an individual adjustment to the desired heat. The "inDive-Touch" as well as the "inDive-Push" heating control come in waterproof design, a danger of electric shock is excluded.
Safety note: Basically, all heating products must be operated with an adjustable heating control to prevent possible overheating or other hazards. In addition, the subjectively desired heating warmth is optimally adjusted with a multi-stage heating control.
10 reasons that speak for valuable as well as sustainable Heizteufel products:
- Heizteufel's product philosophy stands for detail-oriented work, ecological sustainability, innovative solutions and durable longevity of all products.
- The selection of best materials and tested electronic parts by Heizteufel is guaranteed for a demanding customer market
- Custom-made 0.7mm-thick heating wires consist of 550 braided single wires and a robust Teflon sheathing, the bending frequency is > 1.2 Mio.
- Cold-resistant cable conductors ensure high flexibility and bendability even at -40°C, cable connectors are waterproof according to IP69k
- Extremely good battery qualities for a safe and long service life, in-house laboratory tests are carried out with German testing equipment
- Great customer proximity through constant accessibility and consideration of customer opinions for future product developments
- Development, design and production of heated clothing and heated gloves by qualified and socially insured specialists
- Quality control according to US standard MIL-STD-105E, individual testing of gloves, controls and battery packs
- Compliance with all legal regulations regarding battery ordinance, old equipment law, packaging ordinance, DSGVO, etc.
- Telephone consultation, service, repairs and technical adjustments - short ways for your high satisfaction
Photo and application instructions:
- In the photos are shown to the heating gloves Heizteufel LiPo battery heating packages for drysuits, which are not included, but can be ordered as a heating package or optional accessories.
- The diver control is supplied with either V4A anchor magnet or finger ring magnet.
Glove size chart |
German (DIN) |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
US |
XXS |
XS |
S |
M |
L |
XL |
XXL |
XXXL |
|
|
|
|
|
|
|
|
|
Hand circumference (cm) |
12,5 |
15 |
17,5 |
20 |
22,5 |
25 |
27,5 |
30 |
Hand length (cm) |
16 |
17 |
18,5 |
20 |
21 |
22 |
23 |
24 |
How to determine your glove size
- Hand circumference (A): Place the tape measure around the knuckles and palm, without the thumb.
- Hand length (B): Place the tape measure from the wrist to the tip of the middle finger.
Heating values and heating duration |
Power supply |
Power |
Watt |
100% |
Time |
75% |
Time |
50% |
Time |
11.1V PRO (100%) and PRO-Push (100%-75%-50% of the heating power) |
2,65 A |
30 W |
75°C |
2:20 |
65°C |
3:30 |
55°C |
4:40 |
14.8V X-PRO (100%) and X-PRO-PUSH (100%-75%-50% of the heating power) |
3,52 A |
52 W |
|
|
|
|
|
|
Heating duration and heating temperature of a pair of gloves, each equipped with 2 power supplies and depending on the set heating level and ambient temperature. Specifications without guarantee, subject to technical changes.
|
Textile care instructions
- Hand wash 30° - remove battery first
- Do not bleach
- Do not iron
- Do not tumble dry
- Dry on the line
- Do not dry clean