11.1V | 6.000mAh LiPo Battery Pack "Pro-Push Battery" With Illuminated Push Button Heating Control for Heating Clothing and Heating Mats
The LiPo battery pack comes with an illuminated pushbutton control. The push button is slightly raised and thus unerringly accessible. Its slight click when pressed provides tactile feedback. Thus, the setting of a desired heating level is optimally fulfilled.
The battery pack is switched on after pressing the pushbutton for 2 seconds at the highest heating level. After two further heating levels of 75% and 50%, the heating level starts again at 100%. The heating control is switched off with a 2-second push. The heating levels are reflected with an illumination of the button in the colors red - blue - green.
Examples of Applications for a Heating Garment
The battery pack with the heating control is carried in the jacket or trouser pocket. The battery pack can also be attached to the forearm or thigh using Velcro.
Supply cables with different lengths and waterproof connections are offered as accessories for the connection to the heating shirt or heating mat.
Application Examples for Heating Gloves or 2 Heating Garments
The battery is carried in a jacket pocket, for example, and is intended to use parallel Y-adapters to connect the cable with 2 outputs pointing upwards for the heated underwear or for the gloves.
Alternatively, the battery is attached to a forearm using Velcro, with one Y-outlet pointing forward to the glove and the other back to the upper arm, with a 120cm or 180cm extension cable leading to the other glove.
You can specify the desired battery variants when ordering.
The heating power when using heated gloves is approximately 35 watts with freshly charged batteries and 28 watts at nominal 11.1V. The heating power of the heatable underwear or heating mats corresponds to that of the gloves. Battery technology and heating power are optimally matched. However, if the current load exceeds 35 watts, e.g. because another heating garment is to be connected, a 2nd battery pack is required to increase the current load capability and capacity.
We will be pleased to assemble further battery packs on request according to your needs (as double, triple or quadruple pack on top of each other or according to length or width next to each other).
Notes & Features About the Accumulators
The excellent quality of the individually tested battery packs, the very high-quality selection of the raw materials used, and the electronic protective circuits integrated into the battery packs, which include
- Automatic switch-off
- Balancer technology
- Deep discharge protection
- Short circuit with reverse polarity protection
- Charge overvoltage protection
- Discharge current control
- Temperature protection
offer the greatest possible safety for demanding applications and thus correspond to professional battery technology and brand quality, which also stands for a very long battery life.
An adjustment of the battery capacity above 12.0Ah is possible on request!
- IMPORTANT NOTE: Articles with custom-made are excluded from the right of return or exchange. (see right of withdrawal / reasons for exclusion and expiry) -.
