"Medi-Dive": Battery heat pack with proximity sensitive control for diving

Battery heat pack "Medi-Dive" with diver-friendly proximity sensitive control unit

The waterproof battery packs come with double-sided velcro-tape for fit the underarm, from there is a 30cm cable to connect the heated innerglove "inDive" easily after putting on the diver suit. The connections are waterproof. The battery packs come with integrated, 4-level heat control switchable by proximity. The activation of the diver heat control is done by the small magnetic ring worn around the finger. Simply moves the hand over the diver control unit (with a max distance 20mm away from the unit) and this will turn it on to its maximum output, move the hand once again and it will turn the unit to mid, low and finally off. The touch sensitive is ideal for applications where the unit is worn under the clothes or for people who have difficulties using their hands and fingers during extremely cold weather. The level of heating output is shown by a LED display. The "Medi-Dive" battery packs supply 13W each for the diver gloves "inDive". If a higher heating temperature is requested thus we recommend to use "Pro-Dive" battery packs with a heating supply of 28W.

Further technical details are identical to the Medi heating pack, which is small and light weight. It has a large capacity and integrated safety technology such as balance technology, discharge protection; surge protection and auto turn off. The pack is contained within a skin friendly water resistant textile and can be connected with a heated glove for example, stowed in the battery pocket integrated into the cuff. The heating duration is normally 2 hours at 13 Watt output; the charging of the battery is also 2 hours and can be done by an electronic quick charger that is supplied with the Y-Adapter. The Y-Adapter can also charge at the same time a second Li-Ion battery pack. It can also allow 2 batteries to supply power to the one product, such as a heat mat.

• Heated gloves for normal cold up to -10C
• Heated feet and shoe warmers to -20C
• Heating mats up to a max length of 25cm

Technical details

• Battery pack
• Type: Lithium Polymere battery pack
  Capacity: 2.200mAh
  Voltage: 7.4V LiPo
  Integrated touchless 4 level sensor, up to a max distance of 20mm, maximum 1.5A variable current, levels: ON (100%) -75% -45% -OFF, electronic protection system with balance technology, discharge protection, temperature protection, reverse current protection
  Battery pouch made from 100% Polypropylene, hydrophobic and flame resistant
  Connection cable with cinch connector
  Dimensions: 70x50x16mm (LxWxH)
  Weight: ~90gr.
• Quick Charger
  Input: AC 100-240V
  Output: DC 8,4V
  Charging power: 1.000mA
  Electronically controlled charging unit switches automatically to keep charged mode once unit is fully charged.
  Connection cable with cinch connector
  Dimensions: 75x30x78mm (LxWxH)
  Weight: ~70gr.

Delivery includes

• 2.000mAh @ 7,4V LiPo battery pack with touchless sensor and magnetic ring, set includes 2 items
• 1.000mA @ 8,4V LiPo Quick charger with reverse current protection
• Y-Adapter for simultaneous charging of 2 batteries or using 2 batteries for one heating product
• Instructional manual

Recommended accessories

• Replacement battery: 3-9003-074022/Dive
• Belt clip on pouch: 3-9009