"Pro-Dive-1k": Battery heat pack with line-in proximity heat control for diving heated clothes

Battery heat pack "Pro-Dive-1k" with diver-friendly proximity sensitive control unit

The waterproof battery pack comes with external, 4-level heat control switchable by proximity and worn under the diver dry suit. The activation of the diver heat control is done by the small magnetic ring worn around the finger. Simply moves the hand over the diver control unit (with a max distance 20mm away from the unit) and this will turn it on to its maximum output, move the hand once again and it will turn the unit to mid, low and finally off. The touch sensitive is ideal for applications where the unit is worn under the clothes or for people who have difficulties using their hands and fingers during extremely cold weather. The level of heating output is shown by a LED display. The "Pro-Dive" battery packs supply 28W for diver gloves "inDive". and between 15W and 35W for heated diver underwear and heated mats.

Further technical details are identical to the PRO-TOUCH heating pack, which is small and light weight. It has a large capacity and integrated safety technology such as balance technology, discharge protection; surge protection and auto turn off. The pack is contained within a skin friendly water resistant textile and can be connected with a heated glove for example, stowed in the battery pocket integrated into heated underwear. The charging of the battery is approx. 3 hours and can be done by an electronic quick charger that is supplied with the package.

• Battery pack
• Type: Lithium Ion battery pack
  Capacity: 3.000mAh
  Voltage: 11.1V LiPo
  Integrated touchless 4 level proximity sensor, up to a max distance of 20mm with magnetic ring, maximum 1.5A variable current, levels: ON (100%) -75% -45% -OFF, electronic protection system with balance technology, discharge protection, temperature protection, reverse current protection
  Battery pouch made from 100% Polypropylene, hydrophobic and flame resistant
  Connection cable with cinch connector
  Dimensions: 100x50x16m (LxWxH)
  Weight: ~150gr.
• Quick Charger
  Input: AC 100-240V
  Output: DC 12.6V
  Charging power: 900mA
  Electronically controlled charging unit switches automatically to keep charged mode once unit is fully charged.
  Connection cable with cinch connector
  Dimensions: 75x30x78mm (LxBxH)
  Weight: ~70gr

Delivery includes

• 3.000mAh @ 11.1V LiPo battery pack with touchless sensor and magnetic ring
• 900mA @ 12.6V LiPo Quick charger with reverse current protection
• Instructional manual

Recommended accessories

• Replacement battery: 3-9003-111030/W