Pro-Touch battery heat pack with user friendly touch sensitve control unit
This 11,1V Li-Po battery comes with an integrated 5 level touch sensitive control unit. This technological highlight allows the battery to be worn at any point on the body and below the clothes. Simply touch the hand or finger on sensitive battery part (touch zone space is 20x30mm) and the touch control unit will turn on to its maximum output, touch the sensor space again and it will turn the heat level to the next step, to 75% - 50% - 25% and finally off. The touch sensitive is ideal for applications where the unit is worn under the clothes or for people who have difficulties using their hands and fingers during extremely cold weather. The level of heating output is shown by a LED display.
Further technical details are identical to the PRO heating pack, which is small and light weight. It has a large capacity and integrated safety technology such as balance technology, discharge protection; surge protection and auto turn off. The pack is contained within a skin friendly water resistant textile and can be connected with a heated glove for example, stowed in the battery pocket integrated into the cuff. The heating duration is normally 3 hours at 14 Watt output. The charging of the battery is approx. 6 hours and can be done within 1,5 hours by an electronic 2A quick charger. The supplied Y-Adapter can also charge at the same time a second LiPo battery pack. It can also allow 2 batteries to supply power to the one product, such as heated underwear or heat mat.
For use for example with the following products from the HeizteufelTM Range
- Heated gloves for normal cold up to -40C
- Heated feet and shoe warmers (only recommended with optional controller)
- Heated neoprene kidney belt
- Heated vests and heated underwear
- Heating mats up to a max length of 30cm
Technical details
- Battery pack
- Type: Lithium Ion battery pack
Capacity: 3.000mAh
Voltage: 11.1V LiPo
Integrated touchless 4 level sensor, up to a max distance of 20mm, maximum 1.5A variable current, levels: ON (100%) -75% -45% -OFF, electronic protection system with balance technology, discharge protection, temperature protection, reverse current protection
Battery pouch made from 100% Polypropylene, hydrophobic and flame resistant
Connection cable with cinch connector
Dimensions: 100x50x16m (LxWxH)
Weight: ~150gr.
- LiPo Battery Charger
Input: AC 100-240V
Output: DC 12.6V
Charging power: 500mA
Electronically controlled charging unit switches automatically to keep charged mode once unit is fully charged.
Connection cable with cinch connector
Dimensions: 75x30x78mm (LxBxH)
Weight: ~70gr
Delivery includes
- 3.000mAh @ 11.1V LiPo battery pack with touchless sensor and electronic protection, set includes 2 items
- 500mA @ 12.6V LiPo Quick charger with reverse current protection
- Y-Adapter for simultaneous charging of 2 batteries or using 2 batteries for one heating product
- Instructional manual
Recommended accessories
- Replacement battery: 3-9003-111030/Touch
- LiPo battery quick charger with 2.000mA charging power: 3-9006-111020
- Belt clip on pouch: 3-9009
