Battery heat pack with user-friendly touch sensitive control unit
This 7,4V Li-Po battery comes with an integrated 5 level touch sensitive control unit. This technological highlight allows the battery to be worn at any point on the body and below the clothes. Simply touch the hand or finger on sensitive battery part (tip sensor space is 20x30mm) and the touch control unit will turn on to its maximum output, touch the sensor space again and it will turn the heat level to the next step, to 75% - 50% - 25% and finally off. The touch sensitive is ideal for applications where the unit is worn under the clothes or for people who have difficulties using their hands and fingers during extremely cold weather. The level of heating output is shown by a LED display.
Further technical details are identical to the Medi heating pack, which is small and light weight. It has a large capacity and integrated safety technology such as balance technology, discharge protection; surge protection and auto turn off. The pack is contained within a skin friendly water resistant textile and can be connected with a heated glove for example, stowed in the battery pocket integrated into the cuff. The heating duration is normally 2 hours at 13 Watt output; the charging of the battery is also 2 hours and can be done by an electronic quick charger that is supplied with the Y-Adapter. The Y-Adapter can also charge at the same time a second Li-Ion battery pack. It can also allow 2 batteries to supply power to the one product, such as a heat mat.
For use for example with the following products from the HeizteufelTM Range - Heated gloves for normal cold up to -10C
- Heated feet and shoe warmers to -20C
- Heating mats up to a max length of 25cm
Technical details
- Battery pack
- Type: Lithium Polymere battery pack
Capacity: 2.200mAh
Voltage: 7.4V LiPo
Integrated touchless 5 level sensor, up to a max distance of 20mm, maximum 1.5A variable current, levels: ON (100%) -75% - 50% - 25% - OFF, electronic protection system with balance technology, discharge protection, temperature protection, reverse current protection
Battery pouch made from 100% Polypropylene, hydrophobic and flame resistant
Connection cable with cinch connector
Dimensions: 70x50x15mm (LxWxH)
Weight: ~90gr. - Quick Charger
Input: AC 100-240V
Output: DC 8,4V
Charging power: 1.000mA
Electronically controlled charging unit switches automatically to keep charged mode once unit is fully charged.
Connection cable with cinch connector
Dimensions: 75x30x78mm (LxWxH)
Weight: ~70gr.
Delivery includes
- 2.200mAh @ 7,4V LiPo battery pack with touchless sensor and electronic protection, set includes 2 items
- 1.000mA @ 8,4V LiPo Quick charger with reverse current protection
- Y-Adapter for simultaneous charging of 2 batteries or using 2 batteries for one heating product
- Instructional manual
Recommended accessories
- Replacement battery: 3-9003-074022/Touch5
- Belt clip on pouch: 3-9009
